| Adjustable High-Speed Data Logging - |
With the ability of sampling data at extremely high rates, QwikData outperforms the competition. Data sample rates are adjustable, up to 500 samples per second. |
 |
| Up To 30 Data Input Channels - |
The basic unit comes equipped with 8 analog inputs and 6 digital inputs. The advanced unit has 24 analog input channels and 6 digital inputs. The digital inputs can record on/off events, frequency (such as mph, rpm and digital mass air flow sensor), or duty cycle (such as fuel injectors and turbo boost controller). |
 |
| Windows® Interface - |
The computer software provided is simple and intuitive to use. An IBM-based 486 (or better) laptop computer capable of running Windows® 3.1 (or later) or 98SE, NT, 2000, XP software is required for data analysis. The entire system can be configured from menus using a mouse. No complicated programming is required. |
 |
| Programmable Outputs - |
The two provided outputs can be programmed to operate shift lights, warning lights, etc. These outputs are configured via pull-down menus and can be activated based on any one or two of the input channels. |
 |
| Sophisticated Data Analysis - |
Trend graphs of 8 user selectable input channels against time or distance. |
 |
| Large Data Storage Capacity - |
QwikData provides 1 MB of non-volatile memory, much more than most other systems, and requires no power to retain data. |
 |
| Multiple Lap/Run Comparison - |
Runs or laps can be stored and overlaid. |
 |
| Real Time Display - |
Use for monitoring engine during warm-up, in dyno sessions and troubleshooting with a PC connected; or for real time telemetry via radio modem in circle track/road racing applications. |
 |
| Internet Upgrades - |
The software embedded in the QwikData unit is stored in a chip (FLASH EPROM) and can be updated easily from the Edelbrock web site at www.edelbrock.com |
 |
| Fully Assembled Wiring Harness - |
Pre-installed connectors provided. Each sensor is supplied with the appropriate mating connector for quick and easy installation. |
 |
| Durable Construction - |
Features include laser-cut end plates with gaskets, anodized aluminum enclosure, and high-quality silicone sealed connectors Internal Accelerometers - Measure longitudinal and lateral acceleration Expandability - Add more sensors for additional parameters |