|
Edelbrock E-Force Supercharger Components and Accessories |
 |
E-FORCE 2005-12 CORVETTE 599 HP UPGRADE KIT
This kit contains everything needed to upgrade Corvette supercharger systems #1590 and #1593 from 554 HP to 599 HP. Includes fuel pump module and 3.5" pulley. (No tuning necessary) |
 |
| Description |
Part# |
| E-Force Corvette Supercharger 599 HP Upgrade Kit (LS2/LS3) |
15902 |
|
|
FUEL INJECTORS 41 LB/HR, 52 LB/HR, 60 LB/HR
41 & 50 LB/HR- These fuel injectors are the brand new EV14 series, featuring a compact design with superior dynamic response. They are high impedance, feature the new style USCAR connector (same as a stock Mustang GT) and have a dual spray pattern for multi valve engines. Injectors #15807 are 41 lb/hr and feature a long body. They are included with E-Force Supercharger systems #1580, #1581, 1582 and #1583. Injectors #15901 are 50 lb/hr and have a long body design. They are already included with E-Force Supercharger system #1588.
46 LB/HR- These 46 lb/hr fuel injectors are the perfect accessory for Competition Supercharger systems #1531, #1533 and #1537. They are included in systems #1530, #1532 and #1536. They feature a USCAR style connector and have a medium body length.
52 LB/HR- These 52 lb/hr fuel injectors are the perfect accessory to the Competition Supercharger systems #1576, #1592, #1596 and #1599. These are the same injectors included in the
#1574, #1575, #1590, #1591, #1593, #1594, #1597 and #1598 E-Force Supercharger systems, and equipped stock on the Corvette ZR1. They feature the compact body length, and USCAR connector.
60 LB/HR- These 60 lb/hr fuel injectors are the perfect accessory for our Competition Supercharger systems. They are capable of supporting over 800 HP and feature Bosch style connectors. Fuel
injector #3686 is for use with Mustang E-Force Competition systems #1585, #1587 and #1589. Fuel injector #15903 is for use with E-Force Competition systems #1573, #1586, #1592, #1595, #1596 and #1599. |
 |
| Description |
Part# |
| Fuel Injectors (41 lb/hr, EV14, USCAR, 60mm body, set of 8) |
15807 |
| Fuel Injectors (50 lb/hr, EV14, USCAR, Long body, set of 8) |
15901 |
| Fuel Injectors (52 lb/hr, EV6, USCAR, Medium body, set of 8) |
15909 |
| Fuel Injector (52 lb/hr, set of 8) |
15907 |
| Fuel Injector (60 lb/hr, set of 8) |
3686 |
| Compact Fuel Injector (60 lb/hr., set of 8), included with #1572 |
15903* |
| Adapter (required for vehicles equipped with USCAR injectors, set of 8) |
15904* |
|
|
FUEL RAILS
These fuel rails are designed for use with our 2005-10 Ford Mustang 4.6L 3V E-Force Supercharger Competition systems. These high capacity fuel rails are made from extruded aluminum and feature -6 AN ends for increased flow to support the demands needed in high horsepower applications. They also include positioning brackets to secure the injector in the ideal position for optimum performance. Kit contains fuel rails, fuel hoses, fittings, mounting brackets and all of the necessary hardware needed for installation. |
 |
| Description |
Part# |
| E-Force Fuel Rail Kit for 2005-10 Ford Mustang (4.6L 3V) |
3623 |
|
|
E-FORCE COMPETITION AIR INTAKE KITS
E-Force Competition Air Intake kits provide the increased air flow needed for racing applications. They include a high flow Mass Air Flow Sensor (on some applications), reusable open element filter, plastic shroud and all necessary hardware for installation. Mustang GT kits include a 7.85" long, reusable, open element filter and a plastic intake shroud. Camaro kit utilizes a 9" long, reusable, open element filter and plastic intake shroud. Kit #15803 is intended for use when upgrading from system #1580, which already includes a sensor. These kits are for Competition use only. |
 |
| Description |
Part# |
| Competition Air Intake System For 2010 Chevy Camaro SS (Uses Factory MAF Sensor) |
15988* |
| Competition Air Intake System For 2005-09 Mustang GT (Does NOT include MAF Sensor) |
15803* |
| Competition Air Intake System For 2005-09 Ford Mustang |
15808* |
| Competition Air Intake System For 2010 Ford Mustang |
15828* |
| Competition Air Intake Kit for 2011-12 Mustang GT |
15898* |
|
|
ALUMINUM COIL COVERS
Dress up your Competition kit with these coil covers that are included with the E-Force complete supercharger systems #1530, #1532, #1536, #1572, #1574, #1575, #1580, #1582, #1590, #1591, #1597 and #1598. |
 |
| Applications |
Part# |
| Aluminum Coil Covers For 2005-10 Ford Mustang GT |
41133 |
| Aluminum Coil Covers for 2008-10 LS3 C6 Corvette |
41123 |
| Aluminum Coil Covers For 2010-11 Grand Sport Corvette with Dry Sump (LS3) |
41103 |
| Aluminum Coil Covers For 2010 Camaro SS |
41143 |
| Aluminum Coil Covers for 2005-11 Chrysler HEMI |
41113 |
|
|
PULLEYS FOR E-FORCE COMPETITION SUPERCHARGER SYSTEMS
E-Force Competition Supercharger Pulleys are required for installation of E-Force Supercharger systems #1531, #1533, #1537, #1573, #1576, #1585, #1587, #1589, #1592, #1595, #1596, #1599 and #15997. Available in six different sizes for fine tuning air flow for your specific racing needs. |
 |
| Description |
Part# |
| 2.75" Pulley |
15823 |
| 3.00" Pulley |
15822 |
| 3.25" Pulley (included with E-Force Supercharger systems #1572, #1581 and #1583) |
15821 |
| 3.50" Pulley (included with E-Force Supercharger systems #1591, #1594 and #1598) |
15820 |
| 3.75" Pulley (included with E-Force Supercharger systems #1588) |
15825 |
| 3.875" Pulley (included with E-Force Supercharger systems #1536, #1580, #1582, #1590, #1593 and #1597) |
15824 |
|
|
MAFS SENSOR KITS
Edelbrock's high flow Mass Air Flow Sensor (MAFS) for GM and Ford applications are the perfect upgrade for any MAFS equipped vehicle with performance upgrades that have elevated air flow above the range of the stock sensor. The Ford sensor #15402 increases the air flow to 113 lbs. per minute. Both kits utilize a large 95mm venturi style housing that reduces air flow restriction and improving the overall horsepower potential. These sensors feature an injection molded housing for OEM level precision with a modern blade-style element for the latest in technology and easy installation on newer vehicles. Match these kits with our conical
air filter for the optimal air flow performance upgrade. |
 |
| Description |
Part# |
| Mass Air Flow Sensor Kit for GM Universal Application |
15401 |
| Mass Air Flow Sensor Kit for Ford Universal Application |
15402 |
|
|
REPLACEMENT CONICAL AIR FILTER
These replacement air filters will work with Edelbrock E-Force Competition Air Intake Kits as well as other aftermarket cold air intake systems. Available in 7" or 9" length with a 6" inlet diameter. Both air filters are washable and reusable. |
 |
| Description |
Part# |
| 7" Universal Replacement Conical Air Filter |
15403 |
| 9" Universal Replacement Conical Air Filter |
15404 |
|
|
BELT TENSIONER BRACE
This belt tensioner brace is intended for use on 2005-10 Mustangs and 2004-10 F-150 trucks with an aftermarket supercharger installed. The stock belt tensioner is cast aluminum and has been known to bend and even break under extreme driving. The Edelbrock Steel Belt Tensioner Brace is an inexpensive solution to this common problem. It simply bolts on to your stock tensioner and prevents any deflection of the cast arm. Already included with E-Force supercharger systems #1580, #1581, #1582, #1583, #1585 and #1587. |
 |
| Description |
Part# |
| Steel Belt Tensioner Brace |
15806 |
|
|
PC INTERFACE KIT (USB)
This kit is for use with the DiabloSport Predator handheld tuning module supplied with E-Force Supercharger systems #1530, #1532, #1536, #1580 and #1582. It allows for updated calibrations to be downloaded from the Edelbrock web site, which can then be uploaded to the vehicle's ECU. Includes an AC adapter, USB to Serial cable and a CD containing the necessary Windows, Mac and Linux(!) drivers. |
 |
| Description |
Part# |
| PC Interface Kit for DiabloSport Predator Tuning Module |
15809 |
|
|
COOLING SYSTEM UPGRADE KIT FOR 2005-06 FORD MUSTANGS
Our Cooling System Upgrade Kit is necessary when installing the new Edelbrock E-Force Supercharger Kits #1580 and #1585 in a 2005-06 Mustang GT. This kit relocates the thermostat from the cold side of the radiator to the hot side for improved cooling. Kit contains all necessary hoses, clamps and hardware. |
 |
| Description |
Part# |
| Cooling System Upgrade Kit (For 2005-06 Ford Mustang GT) |
15804 |
|
|
HARDWARE KIT FOR 2009 FORD MUSTANG
This kit is required when installing the new Edelbrock E-Force Supercharger Kits #1580 and #1585 in a 2009 Ford Mustang GT. Includes new intake gaskets and all the necessary hardware for 2009 specific installation. |
 |
| Description |
Part# |
| Hardware Kit For 2009 Ford Mustang GT |
15805 |
|
|
CAMARO SS CONVERTIBLE BRACE
This Convertible Brace is required when installing an E-Force supercharger systems into a 2011-12 Camaro SS. Kit includes brace and high-quality zinc coated hardware necessary for installation. |
 |
| Description |
Part# |
| Convertible Brace (For use with E-Force systems #1596, #1597, #1598 and #1599) |
15956 |
|
Chevy Camaro SS
