|
Edelbrock E-Force Supercharger Accessories |
 |
EDELBROCK ALUMINUM COIL COVERS
These covers are the same great looking covers included in the #1580 kits, but can be used on any 2005-2010 Mustang GT |
 |
| Applications |
Part # |
| Edelbrock Aluminum Coil Covers (For 2005-06 Ford Mustang GT) |
41133 |
|
|
COOLING SYSTEM UPGRADE KIT FOR 2005-06 FORD MUSTANGS
Our Cooling System Upgrade Kit is necessary when installing the new Edelbrock E-Force Supercharger Kits #1580 and #1585 in a 2005-06 Mustang GT. This kit relocates the thermostat from the cold side of the radiator to the hot side for improved cooling. Kit contains all necessary hoses, clamps and hardware. |
 |
| Description |
Part# |
| Cooling System Upgrade Kit (For 2005-06 Ford Mustang GT) |
15804 |
|
|
HARDWARE KIT FOR 2009 FORD MUSTANG
This kit is required when installing the new Edelbrock E-Force Supercharger Kits #1580 and #1585 in a 2009 Ford Mustang GT. Includes new intake gaskets and all the necessary hardware for 2009 specific installation. |
 |
| Description |
Part# |
| Hardware Kit For 2009 Ford Mustang GT |
15805 |
|
|
BELT TENSIONER BRACE
This new belt tensioner brace is intended for use on 2005-09 Mustangs and F-150 trucks with an aftermarket supercharger installed. The stock belt tensioner is cast aluminum and has been known to bend and even break under extreme driving. The Edelbrock Steel Belt Tensioner Brace is an inexpensive solution to this common problem. It simply bolts on to your stock tensioner and prevents any deflection of the cast arm. Already included with E-Force supercharger kit #1580 and #1585. |
 |
| Description |
Part# |
| Steel Belt Tensioner Brace |
15806 |
|
|
FUEL INJECTORS 41 LB/HR & 60 LB/HR FUEL INJECTORS
The 41 lb/hr injectors are the brand new EV14 series, featuring a compact design with superior dynamic response. They are high impedance, feature the new style USCAR connector, have 60mm body length (same as a stock Mustang GT) and have a dual spray pattern for multi valve engines. Already included with E-Force supercharger kit #1580. The 60 lb/hr fuel injectors are the perfect accessory to the Competition Supercharger Kit #1585. They are capable of supporting over 800 HP. They feature a 60mm body (same as a stock Mustang GT) with Bosch style connectors. |
 |
| Description |
Part# |
| Fuel Injectors (41 lb/hr, EV14, USCAR, 60mm body, set of 8) |
15807 |
| Fuel Injector (60 lb/hr, set of 8) |
3686 |
|
|
E-FORCE COMPETITION AIR INTAKE SYSTEM
The E-Force Competition Air Intake System includes a high flow, 95mm, Mass Airflow Sensor (MAFS) capable of supporting up to 90 lbs/min of air flow. It includes an 8" long, reusable, open element filter with plastic shroud. This system is for use with Competition Supercharger kit #1585. |
 |
| Description |
Part# |
| E-Force Competition Air Intake System |
15808 |
|
|
PULLEYS FOR E-FORCE COMPETITION SUPERCHARGER KITS
E-Force Competition Supercharger Pulleys are required for installation of E-Force Supercharger kit #1585. Available in four different sizes for fine tuning air flow needs for your specific racing needs. |
 |
|
|
|
DIABLOSPORT PC INTERFACE KIT (USB)
Necessary cable needed to download the latest and greatest software updates. |
 |
| Description |
Part# |
| DiabloSport PC Interface Kit (USB) |
15809 |
|
Camaro SS (2010)
