E-FORCE SUPERCHARGERS - Fuel Injected - Competition Kit

Edelbrock E-Force Supercharger Competition Kit
Edelbrock E-Force Competition Supercharger kit #1585 includes all of the essential components that a racer or tuner shop would need to build a custom supercharger for racing applications. Our competitors kits often require that you buy a complete system and then remove the components that would not be utilized on a custom build. The Edelbrock E-Force Competition kit #1585 gives you the option of choosing the equipment you want when building a custom supercharged Mustang. This kit includes the essential supercharger package components with selectable options based on your purpose built needs - from our Competition Air Intake System #15808 to fuel injectors (available in 41 lb/hr and 60 lb/hr), pulleys (available in 3.5", 3.25", 3.0" and 2.75") and much more. Finally, finish off your custom installation with a set of Edelbrock E-Force Coil Covers #41133. These covers are black powdered coated for durability with contrast machined fins and the Edelbrock logo for a clean look. We are confident that our E-Force Supercharger Systems will provide the best performance at a competitive price. Our systems are also easy to install and are the quietest on the market today. Each system is backed by Edelbrock's exceptional customer service and superior quality.

Attention Professional Tuners and Installers!
Our competitive pricing allows you the opportunity to configure a high horsepower custom tailored package to your customers. A kit could consist of our Competition kit #1585, Competition Air Intake System #15808, injectors and pulley of your choice, a GT500 fuel pump kit from FRPP, and your own tune.
 
Edelbrock E-Force Supercharger Kit #1585 with 2.75" pulley on 91 octane pump gas Engine Specs: Stock 4.6L block, Kellogg 3.8" stroke forged steel crankshaft, Manley 5.85" forged steel H-Beam rods, CP forged Aluminum pistons, stock cylinder heads ported by EEI, Comp Cams VSR "Serious Street" camshafts and BHJ SFI-Approved 7.5" Damper and 8.9:1 compression.

EDELBROCK E-FORCE SUPERCHARGER COMPETITION KIT
Applications Part #
E-Force Competition Supercharger Kit for 2005-09 Ford Mustang 4.6L 3V 1585*
E-Force Competition Supercharger Kit for 2010 Ford Mustang 4.6L 3V 1587*
E-Force Competition Supercharger Kit for 20011 Ford Mustang 5.0L 4V 1589*
 
E-Force Systems For 2005-11 Mustang Include: #1580 #1585 #1582 #1587 #1588 #1589
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) √ √ √ √ √ √
85mm Electronic Throttle Body √ √ √ √
Cast Aluminum Front Drive Bracket √ √ √ √ √ √
Steel Belt Tensioner Brace √ √ √ √
Heavy Duty Automatic Belt Tensioner √ √
Cast Aluminum Water Crossover √ √ √ √
Large 110 Sq-in Intercooler √ √ √ √ √ √
Dual Core Low Temp. Heat Exchanger for Intercooler System √ √
Full Face, Low Temp. Heat Exchanger for Intercooler System √ √ √ √
Goodyear® Gatorback™ Serpentine Belt √ √ √
Electric Intercooler Water Pump √ √ √ √ √ √
Intercooler Recovery Tank √ √ √ √ √ √
Custom Molded Intercooler Hoses √ √ √ √ √ √
Fuel Injectors (41 lb/hr) √ √ √
Supercharger Pulley √ √ √
HT0 Spark Plugs for 2005-early 2008 Models √
Steel Idler Pulleys With Heavy Duty High Speed Bearings √ √ √ √ √ √
High Flow Panel Air Filter for Stock Airbox √ √ √
Extended Range, Drop-in Style, MAFS √
Injection Molded, High Flow, Air Box Cover √
Edelbrock Aluminum Engine Covers √ √
Extruded Aluminum Fuel Rails √ √
Handheld Calibration Module, Preloaded With All Tunes √ √ √
Plug & Play, Electrical Harness & Installation Hardware √ √ √ √ √ √
 
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.

Installation Instructions for (#1580/#1585) (3.4 MB)
Installation Instructions for (#1582/#1587) (3.3 MB)
Supplemental Warranty Info
* Not legal for sale or use on pollution controlled motor vehicles.
Sign Up To Receive Our Newsletter & Members Only Specials  
Privacy Policy | Order A Catalog | Warranty Information