|
| |
EDELBROCK SUSPENSION COMPONENT HARDWARE
|
|
 |
79-2004 MUSTANG PINION SNUBBER
This Adjustable Pinion Snubber is designed to control wheel hop in 1979-2004 Ford Mustangs. It retains the stock bump stop location for daily driving and allows adjustability by installing a threaded stop insert with a hatch pin. Threaded insert can be adjusted for desired air gap. Manufactured from 1/8" hot rolled steel and laser cut for precision alignment. Features a zinc coated finish for corrosion resistance and includes all the necessary hardware for installation. |
 |
| Application |
Part # |
| 1979-2004 Mustang Pinion Snubber |
#52101  |
|
|
HEAVY DUTY TIE ROD SLEEVES
Install these Heavy Duty Edelbrock Tie Rod Sleeves for a more positive tie rod adjustment. They are manufactured from solid steel hex stock then zinc plated for durable good looks and corrosion resistance. These are stronger than stock OE split sleeves. Fits most AMC, GM & Ford/Mercury applications. Sold in pairs. |
 |
| Application |
Part # |
| 1968-70 AMX and Javelin, 1982-92 Camaro, 1964-70 A-Body, 1978-87 A/G-Body, 1982-92 Firebird & more! High-performance replacement for Moog #ES-2032S (5/8" x 3-3/8") |
#5250 |
| 1967-69 Camaro, 1968-74 Nova, 1965-70 Impala and more! High-performance replacement for Moog #ES-350S (5/8" x 4-7/8") |
#5251 |
| 1970-81 Camaro, 1975-79 Nova, 1971-77 A-Body, 1965-73 V-8 Mustang, 1970-81 Firebird, 1973-87 GM 2wd pick up truck, 1973-92 GM 2wd Suburban High-performance replacement for Moog #ES-2004S (11/16" x 3-1/2") |
#5250 |
|
|
TRAILING ARM RELOCATION BRACKETS
These brackets lower the mounting point of the rear trailing arms. A must for lowered vehicles; they correct the trailing arm angle while lowering the instant center of the vehicle, which improves forward bite and eliminates rear squat during hard acceleration. Two non-stock mounting locations are available as well as the stock location and they will accept Edelbrock, OEM, or any other aftermarket lower trailing arm on the market. Grade 8 hardware is included; welding is required for installation. |
 |
| Application |
Part # |
| 1982-2002 Camaro/Firebird |
#5275 |
|
|
REPLACEMENT TRAILING ARM HARDWARE KITS
These kits replace factory hardware with new bolts, A/N washers and nylock nuts. |
 |
| Application |
Part # |
| 1982-02 Camaro/Firebird |
#5215 |
| 1978-88 A-Body & G-Body |
#5215 |
| 1979-04 Mustang |
#5216 |
| 1964-72 A-Body |
#5217 |
|
|
Application Chart
