|
|
 |
| HARLEY PERFORMANCE - Closeouts |
 |
|
Edelbrock Harley Performance Closeouts |
|
EDELBROCK HARLEY PERFORMANCE BRAKE HOSE KITS
When it comes to looks and performance, the Mach 3 line of all-stainless street legal brake lines is unequaled. Factory assembled at Russell's Torrance, California facilities, these ready-to-install kits require no additional parts or special tools...basic hand tools only. They completely replace stock rubber lines and are simple to install. Special features make Russell brake lines the choice of riders who look for durability, reliability and performance as well as great eye appeal. Take the hose itself - it's the Russell PowerFlex -3 series, constructed of rugged 308 stainless steel braid supported by a PTFE liner designed to withstand aging while eliminating brake line expansion. Mach 3 stainless steel single-piece hose ends are electro-polished for a high-luster finish. They are double-crimped in place to assure precise hose alignment. Russell factory-assembled brake lines have the proper fittings to make replacing stock brake lines a snap. Installation has never been so easy! Mach 3 all-stainless steel brake line kits are street legal which means that they meet the rigid requirements of the D.O.T. MVSS-106 specifications. Plus, all lines are clear coated as an extra measure of protection for painted surfaces. |
 |
| Description |
Part # |
| |
| FX Models |
| Mach 3 Brake Hose Kit for 1984-85 FX (Front) |
R08725DS |
| Mach 3 Brake Hose Kit for 1980 FX & XL (Front) |
R08938S |
| Mach 3 Brake Hose Kit for 1980 FX & XL (Front) |
R08939S |
| Mach 3 Brake Hose Kit for 1984-87 FX (Front) |
R08957S |
| Mach 3 Brake Hose Kit for 1984-87 FX (Front) |
R08958S |
| |
| FLH Models |
| Mach 3 Brake Hose Kit for 1982-83 FLH (Front) |
R08923S |
| Mach 3 Brake Hose Kit for 1982-83 FLH (Front) |
R08918S |
| |
| XL Models |
| Mach 3 Brake Hose Kit for 1980 FX & XL (Front) |
R08938S |
| Mach 3 Brake Hose Kit for 1980 FX & XL (Front) |
R08939S |
| |
| Click Here to buy Edelbrock Harley Performance Brake Hose Kits |
 |
|
|
EDELBROCK HARLEY PERFORMANCE CYLINDER HEADS
All Edelbrock cylinder heads include high-grade stainless steel swirl-polished valves, ductile iron seats and guides, PTFE valve stem seals, radius valve job, and heavy duty valve springs. They are made of A356 aluminum heat treated to T-6 specs. Edelbrock heads must be used with Edelbrock manifolds, see page 17 & 19. Valve spring specs for Performer RPM heads: maximum valve lift .650", 1.460" OD with dampener, installed seat pressure 175 lbs., installed height 1.800", titanium retainers and 7° locks. |
 |
| Description |
Part # |
| |
| EVO Cylinder Heads |
| 83cc Performer RPM Cylinder Heads for EVO Big Bore, polished finish |
30211 |
| PERFORMER RPM CYLINDER HEADS, BARE FOR S&S 4.0" BORE - NO LOGO |
3006 |
| |
| Twin Cam Cylinder heads |
| 72cc Performer RPM Cylinder Heads for Twin Cam Carb and EFI 2005-Earlier, polished finish |
3080 |
| 88cc Performer RPM Cylinder Heads for 2005 & earlier Twin Cam, aluminum finish. |
3049 |
| |
| Click Here to buy Edelbrock Harley Performance Cylinder Heads |
|
|
|
EDELBROCK HARLEY PERFORMANCE INTAKE MANIFOLDS
Edelbrock aluminum intake manifolds must be used with Edelbrock cylinder heads. They have the same rectangular intake port as our heads for maximum performance. All Edelbrock manifolds come with gaskets, bolts, grommets and vacuum fittings (if needed) and are 50-state legal with Edelbrock Performer heads. Performer 3-piece manifolds have walls that are 1/4" thick at all points to allow for modifications, if desired. They are highly recommended for use with Performer RPM heads because of the various combos used. Available in eight width configurations for various cylinder head/barrel length combinations. |
 |
| Description |
Part # |
| Dual carb intake manifold for use with Edelbrock RPM Heads on EVO 80" applications |
8622 |
| Dual carb intake manifold for use with Edelbrock Performer & RPM Heads on Big Twin EVO applications |
8602 |
| Dual Carb Manifold for Performer RPM Heads, Twin Cam #3020, #3024, #3049, #3080 with 103" S&S Kit (+0.200") |
8623 |
| |
| Click Here to buy Edelbrock Harley Intake Manifolds |
|
|
|
EDELBROCK HARLEY PERFORMANCE ENGINE COMPONENTS
|
 |
| Description |
Part # |
| |
Camshafts
Match the Performer-Plus cam with our Performer heads for power in 80-inch bikes. Our Performer RPM cam matches with our Performer RPM heads for power in high-performance 80-inch and larger Big Twins and high-performance Sportsters. Cam #1742 fits 1986-90 Sportster 4-speeds and #1743 fits 1991 and later 5-speeds. Cam #1741 is the most versatile cam for 80- to 96-inch Evos. |
| Performer RPM Camshaft and Gear Set for 1986-90 Sportsters (4-speed) |
1742 |
| Performer RPM Camshaft and Gear Set for Big Bore (Recommended for 100121-inch engines) |
1749 |
| Performer RPM Camshaft and Gear Set for Twin Cam |
1748 |
| Performer RPM Camshaft for 2006 Harley Davidson Dyna Model with Twin Cam Motor |
1734 |
| Performer RPM Gear Drive Camshaft Set for Twin Cam |
1735 |
| |
Pistons
Edelbrock/JE Pistons are designed to match the unique combustion chamber of Edelbrock heads. These are the only pistons to use when increasing compression ratios with Edelbrock heads. Important Notes: Edelbrock/JE pistons only work with Edelbrock heads due to unique dome configuration. All pistons come with rings, wrist pins and locks. |
| JE Pistons for EVO Big Twin 3-5/8" (+0.005") Bore with Standard Stroke |
1706 |
| JE Pistons for EVO Big Twin 3-5/8" (+0.010") Bore with Standard Stroke |
1707 |
| JE Pistons for EVO Big Twin 3-5/8" Bore with Standard Stroke |
1705 |
| JE Pistons for EVO Big Twin, 3-5/8" (+0.020") Bore with Standard Stroke |
1708 |
| JE Pistons for Twin Cam, 3-7/8" (+0.020") |
3143 |
| |
Gaskets
Complete upper-end gasket kits that include all the necessary gaskets to install Edelbrock cylinder heads. These .045" head gaskets provide the correct compression ratio with Edelbrock cylinder heads. |
| Complete Gasket Set for 100", 107", 117", 121" and 124" Big Bore EVO Motors with 4" and 4-1/8" Bore |
30216 |
| |
Valve Springs
This kit provides replacement shims for those engine builders who install Edelbrock Performer RPM cylinder heads. |
| Valve Spring Shim Kit for Big Twin and Sportster Cylinder Heads |
1650 |
| |
| Click Here to buy Edelbrock Harley Engine Components |
|
|
|
|
