Screamin' Eagle® EFI Tuner software version 3-4.1

To use the Tuning Mode Calibration files in this html document:

1.) Click on the Link for the appropriate version of the file you wish to save to your hard drive.
• "Screamin' Eagle® EFI Software" versions earlier than 3.5 will use the version "3.1" map
• "Screamin' Eagle® EFI Software" version 3.5 will use the version "3.5" map
• "Screamin' Eagle® EFI Software" version 4.0 will use the version "4.1" map

2.) When the "File Download" dialogue box appears click the "Save" button. This will prompt a "Save As" dialogue box to appear. When this appears, choose the directory in which you wish to save the calibration file.

3.) Before clicking save, Make sure that the "Save as type" menu (at the bottom of the "Save As" dialogue box) is set to "All Files"

4.) Click save

5.) Open your Screamin' Eagle Tuning Mode program (If you do not have this program installed, refer to the documentation that came with your Screamin' Eagle® EFI Tuner Software)

6.) Select "Load Tuning File" from the File menu. This will prompt the "Select Tuning Mode File to Load" dialogue box to appear.

7.) In the "Select Tuning Mode File to Load" dialogue box, locate the directory in which you saved the calibration file, select the calibration file, and open it.

Note: If, upon opening the calibration file, the Tuning mode program presents you with "0.0" in every data field, you are in "Basic mode" and will need to switch to Advanced mode". To do so, select "Advanced Mode" by opening the "Setup" menu (in Tuning Mode), and then selecting the "Basic and Advanced Mode" submenu.