|
|
 |
 |
- TWIN CAM PERFORMER RPM KITS |
|
 |
| |
|
 |
|
 |
|
95-INCH TWIN CAM PERFORMER RPM POWER PACKAGE
The Performer RPM Package will supply all of the necessary components to upgrade your existing 88" or 95" Twin Cam motor. The kit is designed to provide the correctly matched components necessary to achieve our
advertised power levels. The kit includes heads, camshaft, pistons, adjustable pushrods, and all gaskets needed for the kit installation. New for 2004, this kit is also available with gear drive cams. For individual components, click here.
 |
Edelbrock black finish CNC-ported cylinder heads #1687 with a 72cc combustion chamber |
|
Edelbrock Performer RPM camshafts #1748 |
|
Edelbrock/JE Pistons #3140 STD bore, 10.25:1, includes pins, rings and locks |
|
Gasket set #16876 (includes all gaskets needed for upgrade) |
|
Adjustable pushrod set #1738 |
108 HP
110 FT/LBS.
COMPRESSION RATIO 10.25:1
|
|
|
 |
|
 |
|
|
|
 |
| Performer RPM Package with black CNC'd finish heads for 88"or 95" Twin Cam and chain drive cams |
#16874 |
|
| Performer RPM Package with black CNC'd finish heads for 88"or 95" Twin Cam and gear drive cams |
#16875 |
|
| Performer RPM Package with grey CNC'd finish heads for 88"or 95" Twin Cam and chain drive cams |
#16644 |
|
| Performer RPM Package with grey CNC'd finish heads for 88"or 95" Twin Cam and gear drive cams |
#16645 |
|
|
|
|
|
The Edelbrock Twin Cam bike at the White Brothers Shootout making over 100 hp at the wheel |
|
This package must be used with an Edelbrock intake manifold, sold separately, to match your choice of carburetor, click here.
Recommended spark plugs for these heads are Champion RA8HC. |
|
|
|
|
|
|
){kind=small}
){kind=small}