|
|
 |
| OFF-ROAD CARBURETORS - Honda Motorcycles |
 |
| HONDA MOTORCYCLES |
|
1986-04 XR250R
Works well on stock engine with snorkel removed from air box and aftermarket slip-on muffler. Expect larger power increases with cam and high compression piston.
Bore: 30x32mm oval
Twist Kit #3116
 Horsepower and RPM Chart |
 |
|
1996-04 XR400R
Carb kit is calibrated for use with just a simple slip-on muffler and snorkel removed from top of air box. Also works great with internal engine mods up to 440cc.
Bore: 32x38mm oval
Twist Kit #3112
Horsepower and RPM Chart |
|
|
1988-00 XR600R
Works great with aftermarket exhaust and open air box on modified engines up to 628cc.
Bore: 36x40mm oval
Twist Kit #3113
Horsepower and RPM Chart |
|
|
2000-07 XR650R
Works great with stock exhaust with HRC tip installed and opened up air box. Requires the use of Honda Power-up manifold #16211-MBN-640.
Bore: 42x36mm oval
Twist Kit #3115
Horsepower and RPM Chart |
|
|
1995-2008 XR650L
Carb kit increases power and torque across the RPM range when used with a performance muffler and filter.
Bore: 34x40mm oval
Twist Kit #3117
Horsepower and RPM Chart |
 |
|
|
| Notes: |
All carb kits are pre-jetted on stock motors with open/modified air box, aftermarket exhaust, stock ignition, and 91 octane fuel at 1500 ft. elevation unless specified. |
|
Thumb kits use stock throttle housing unless specified. Twist kits include push/pull cables which may fit into the stock throttle housing. All ATV twist kits and some motorcycle kits
will have a push/pull type throttle housing included. |
|
|
Honda ATV
