OFF-ROAD CARBURETORS - Yamaha
YAMAHA ATV
2004-08 YFZ450
Carb is designed to be used with open air box and aftermarket performance exhaust. Smooths out power band while maintaining low end throttle response and increasing horsepower.
Bore: 40mm round
Thumb Kit #3177
Twist Kit #3178
Horsepower and RPM Chart
2001-05 RAPTOR
This kit is a single carb conversion that replaces the finicky dual CV carbs. No more removing the carb for jetting. Works best with performance exhaust and open air box. Aluminum plenum attaches to stock air box. Includes new manifold.
Bore: 36x42mm oval
Thumb Kit #3026
Twist Kit #3154
Horsepower and RPM Chart
1987-04 WARRIOR
The Warrior kit works best with performance exhaust and open air box. Kit includes new manifold that moves carb closer to motor for increased horsepower without sacrificing low end torque.
Bore: 32x36mm oval
Thumb Kit #3011
Twist Kit #3150
Horsepower and RPM Chart
2005-2008 RAPTOR 350
Designed to work on a stock or slightly modified Yamaha Raptor 350, this Edelbrock Performer Series carburetor increases horsepower and torque without sacrificing ride-ability. Available with thumb or twist throttle operation.
Bore: 32x36mm
Thumb Kit #3108
Twist Kit #3109
Horsepower and RPM Chart
2004-2007 RHINO 660
Designed to work on a stock or slightly modified Yamaha Rhino 600, this Edelbrock Performer Series carburetor increases horsepower and torque without sacrificing ride-ability. This complete kit comes with everything needed for a direct bolt-on. Bore: 40mm Round
Part No: #3119
Horsepower and RPM Chart
2002-08 Yamaha Grizzly 660
The 3205 is a complete carb kit being offered for the 2002-07 Yamaha Grizzly. This has been our most requested carb kit for over five years. The Yamaha Grizzly has and is still the number one selling ATV on the market. Our testing showed a gain of over 1HP and 1FTlbs over stock. These numbers were achieved using a stock exhaust system and closed air box, which calculates into a 5% increase. On motors of the same make and size we noticed a gain of 10% with and aftermarket exhaust.
Bore: 40mm Round
Thumb Kit Part No: #3205
YAMAHA MOTORCYCLES
1998-06 YZ/WR400-450
Carb works great with stock exhaust on YZ models. WR models work best with performance exhaust and air box snorkel removal. Bore: 40mm round
Twist Kit #3148
Horsepower and RPM Chart
Notes: All carb kits are pre-jetted on stock motors with open/modified air box, aftermarket exhaust, stock ignition, and 91 octane fuel at 1500 ft. elevation unless specified.
Thumb kits use stock throttle housing unless specified. Twist kits include push/pull cables which may fit into the stock throttle housing. All ATV twist kits and some motorcycle kits will have a push/pull type throttle housing included.
Privacy Policy | Order A Catalog | Warranty Information | Site Map
©2008 Edelbrock Corporation