|
|
 |
NITROUS SYSTEMS - Accessories - Solenoids - Fuel |
 |
|
|
NITROUS SYSTEM FUEL SOLENOIDS
Amp Draw: Amp Draw: 1.29 amps @ 13.8 volts and 1.5 amps @ 12.6 volts
Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a TeflonŽ plunger for reliability and longevity, and a powder-coated coil cover for durability and appearance. The Victor Pro nitrous solenoid is perfect for racers because the bottom outlet design restricts flow much less then a standard design solenoid. This feature, combined with a .115" internally drilled metering orifice, make this our highest flowing nitrous solenoid. The Victor Pro fuel solenoid features a shorter body with a smaller diameter stainless steel base for use where space is limited. An important note about Amp Draw: All ratings listed below are under a load condition (For example: 950 PSI nitrous and a minimum of 6 PSI fuel pressure). Please note that other manufacturers may list amp draw under a "no load" condition, which is not realistic.
|
 |
NITROUS SYSTEM FUEL SOLENOIDS FEATURE:
- Edelbrock solenoids have a very low amp draw
- A stainless steel base for corrosion resistance and tighter tolerances
- Fuel Solenoids- Amp Draw: 1.29 amps @ 13.8 volts and 1.5 amps @ 12.6 volts
- Victor Pro fuel solenoid features a shorter body with a smaller diameter stainless steel base for use where space is limited
- Available in different sizes to suit your application
|
|
|
|
|
|
| Description |
Part # |
| Performer Fuel Solenoid - up to 150 HP at 6 PSI with 1/8" NPT inlet & outlet |
72050 |
| Performer RPM Fuel Solenoid - 250+ HP at 6 PSI with 1/4" NPT inlet & 1/8" NPT outlet |
72051 |
| Victor Pro "Small Base" Fuel Solenoid - 500+ HP at 6 PSI with 1/8" NPT inlet & outlet |
72052 |
|
|
Features and Benefits
Accessories
)
)
)
)