|
|
 |
THROTTLE BODIES - Victor X |
 |
|
|
VICTOR X THROTTLE BODIES
HONDA/ACURA 70-75mm THROTTLE BODIES
Victor 70mm and 75mm race throttle bodies can be easily adapted to a wide variety of applications. We eliminated the idle air motor mount and all unnecessary vacuum tubes, making these throttle bodies especially well suited for racing applications. The throttle arm has a cable wheel with multiple take-off points. They are cast and fully machined by Edelbrock, then assembled by Magneti-Marelli USA. Shipped complete and ready to run with a throttle position sensor installed and pre-set, these throttle bodies can be adapted to a number of applications using our 1/2" thick spacer/adapters. Intake port matching may be required in some cases. Spacer/Adapter kit required for mounting to manifolds with stock throttle body bolt pattern.
|
 |
VICTOR X THROTTLE BODIES FEATURE:
- Brand new throttle position sensor is factory installed.
- TPS is pre-calibrated with the same type of high-tech machinery used by OE-manufacturers.
- Edelbrock is the only aftermarket manufacturer that includes a new TPS sensor.
- Assembled by Magneti-Marelli USA, a major manufacturer of OE throttle bodies.
- Cast & machined by Edelbrock in their QS9000 certified factory... QS9000 is required by OE-manufacturers to ensure maximum quality control.
- Sealed ball bearings used in the throttle shaft for smooth, dependable operation.
|
|
|
|
|
| *Can be port-matched to stock or Performer-X intake manifolds for optimal performance |
| Description |
Part # |
| 70mm Throttle Body |
3811 |
| 70mm Spacer/Adapter for Honda and Acura |
38112 |
| 70mm Universal Spacer/Adapter (Undrilled) |
38113 |
| 75mm Throttle Body |
3812 |
| 75mm Spacer/Adapter for Honda and Acura |
38122 |
| 75mm Universal Spacer/Adapter (Undrilled) |
38123 |
|
| (All parts on this page are not legal for sale or use on pollution controlled motor vehicles) |
|
)
)
)
