Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR

$409.95

Edelbrock Performer Pontiac Intake Manifold for 1965-79 Pontiac 326-455 V8 Engines is Designed for Street Applications (except Ram Air V) and Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors. Non-EGR

In stock

SKU

2156

Details

Edelbrock part #2156 Performer Pontiac intake manifold is designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

More Information

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021567
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Pontiac
Availability Note	Available to Order
Warranty	12 Months
Ec Basic Operating Rpm Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7280.; For 1968-71 use our #8015 throttle bracket.; Manifold height: A-5.50", B-6.60" measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05"; Port exit dimensions: 1.06" x 1.92"; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Choke Plate included; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	6.600 in
Single Or Dual Plane Type	Dual