The Edelbrock #45904 Performer RPM E-TEC 435 crate engine is the ultimate 350 cubic inch small-block Chevy for muscle cars, street rods and trucks. Includes a 100% brand new block with cast iron crankshaft, powdered metal rods and hypereutectic pistons, Edelbrock E-TEC 170 heads, Rollin’ Thunder hydraulic roller camshaft, roller rocker arms, RPM Air-Gap intake manifold and Thunder Series AVS 800 cfm carburetor.Installation Notes: • There is no oil in your engine. • Your engine is supplied with Edelbrock Break-In Oil in the crate. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming. • It is important when first starting the engine to keep the rpm above 2,000 for the first 30 minutes. Make sure all fluid levels are topped off and all lines and hoses are hooked up correctly. The break in must be done non-stop. Otherwise, the cam will not break-in properly. This is also a good time to look for leaks of any kind. Engines use a roller cam and do NOT require above procedure. • These engines are not supplied with the crankshaft bolt due to many different applications. The customer must purchase and install the crankshaft bolt that matches the given application.