This system includes two throttle body adapters, one with the stock Coyote bolt pattern and the other with the wider GT350 bolt pattern. Edelbrock 103mm throttle bodies (sold separately) use the GT350 bolt pattern. Two versions of the 103mm throttle body are available, part # 38988 analog (for 2015-17 Gen 2 PCM) and part # 38989 digital (for 2018+ Gen 3 PCM). NOTE: Edelbrock 103mm throttle bodies are NOT compatible with 2011-14 Gen 1 PCMs. Gen 1 applications may use the stock or Ford Racing 90mm throttle body part # M-9926-M5090 (not included).
Due to the nature of swap applications, a front mount heat exchanger is not included. See Edelbrock Universal Heat Exchangers for options.
This kit includes the standard 6-rib belt drive system with 3.25” pulley for about 10-11psi. For high horsepower applications, an optional 8-Rib belt drive system part # 15879 is available separately.
This system DOES NOT include fuel injectors, fuel pump, spark plugs, intake piping and calibration. PCM calibration is not available through Edelbrock for this system. Custom tuning is required!
|System Type||Universal System|
|Housing Material||Cast Aluminum|
|Gasket Or Seal Included||Yes|
|Mounting Hardware Included||Yes|
|Oil Capacity||150 mL|
|Center Housing Cooling Type||Intercooler|
|Internal Step Up||Yes|
|Mounting Bracket Included||Yes|
|Outside Pulley Diameter||3.25 in|
|Availability Note||Available to Order|
|Hazardous Materials Warning||WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.|
|Finish||Black Powder Coated|
|Pulley Belt Width||6-Rib|
|Universal Or Specific Fit||Universal|