Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines

$397.95

Edelbrock Performer 318/360 Intake Manifold for 1966-87 Chrysler "LA" Small-Block Engines is Designed for Street 318-340-360 c.i.d. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors. Non-EGR

In stock

SKU

2176

Details

Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

More Information

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021765
Series	Performer
Material	Aluminum
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7276, Chrysler #4494462AB for 318, #4397642 for 340 and 360 (or equivalent); Manifold height: A-4.13", B-5.13"; Carb pad height: 4.63"; Carb recommendations: OEM 4-Bbl, Edelbrock AVS@ or Performer Series 600-650 cfm. Use #1481 #1483 throttle/transmission lever kit.; Port exit dimensions: .97" x 1.95"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Rear Maximum Height	5.130 in
Single Or Dual Plane Type	Dual