Edelbrock Performer 351 Cleveland 4V Intake Manifold for Ford Cleveland Small-Block 351-C and Boss 351 Fords that came stock with 4V carb and heads. Will Not Fit Boss 302 or accept Stock Motorcraft Spread-Bore Carb.
Edelbrock part #2665 Performer 351-4V intake manifold is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads. Manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32". Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Recommended intake gasket: Fel-Pro #1228; Manifold height: A-3.50", B-4.30; Carb pad height: 3.90"; Carb recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm, for automatic transmissions use #1483 & #1493 or #1844; Port exit dimensions: #2665 - 1.37" x 2.15"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.