Performer 383 Intake Manifold for 1958-1979 Chrysler, B Series Engines

$391.95

Edelbrock Performer 383 Intake Manifold for 1966-72 Chrysler "B" Block V8 Engines is Designed for 361-383-400 c.i.d. Accepts OEM 4-bbl or 4150-Style Square-Bore Carburetors; Non-EGR. Works with EGR for 1972-78 400cid w/ OEM 4-bbl. carb.

In stock

SKU

2186

Details

Edelbrock part #2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block. May be used with OEM or aftermarket carbs. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

More Information

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021864
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
Ec Basic Operating Rpm Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7225; Manifold height: A-3.65", B-4.35", measured to engine block; Carb pad height: 4.00"; Carb recommendations: OEM 4-Bbl, Edelbrock Thunder AVS or Performer Series 600-800cfm.Use #1481 or #1483 throttle/transmission lever kit.; Port exit dimensions: 1.14" x 2.12"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.350 in
Single Or Dual Plane Type	Dual