Free #1221 Air Cleaner With AVS or Performer Carb Purchase Shop Edelbrock
Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy With Oval Port Heads

Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads

Performer 400 Intake Manifold for 1971-82 Ford 351/M400

Performer 400 Intake Manifold for 1971-82 Ford 351/M400

Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish

$397.95
Edelbrock Performer 460 Intake Manifold for Big-Block Ford 429/460 V8 Engines. Will Not Fit Cobra Jet Heads or OEM 4-bbl Carb. Accepts 4150-Style Square-Bore Carburetors. Non-EGR. Will not fit 1988 and later models.
In stock
SKU
2166
Edelbrock part #2166 Performer 460 intake manifold is designed for street 429/460 c.i.d. Ford V8's. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347021666
Series Performer
Gasket Or Seal Included No
Vehicle Model Ford
Availability Note Available to Order
Warranty 12 Months
Ec Basic Operating Rpm Range Idle-5500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended intake gasket: Edelbrock #7223 or Fel-Pro #MS96018; Manifold height: A-3.75", B-4.49" same as stock; Carb pad height: 4.12"; Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm, for automatic transmissions use #1483 and #1495 or #1844; Port exit dimensions: 1.65" x 1.96"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 4.490 in
Single Or Dual Plane Type Dual