The Edelbrock #45121 Performer crate engine is an entry level small-block Chevy crate engines are ideal for any street rod, muscle car or truck owner looking for 300+ hp performance on 87-octane fuel. Performer engines are 100% brand new and include a 4-bolt main short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker arms, Performer Series intake manifold and optional water pump.Installation Notes: • Displacement: 350 c.i.d. • Horsepower: 310 hp • Torque: 372 ft-lbs. • Compression: 8.5:1 • Block: New 4-bolt main w/ 2-piece rear main seal • Crankshaft: Cast Iron • Pistons: Cast Aluminum • Camshaft: Performer #2102 • Rocker Arms: 1.5:1 Roller • Manifold: Edelbrock #27011 Performer EPS • Cylinder Heads: Performer RPM #607519 • Carburetor: Thunder Series AVS #1806 • Water Pump: Edelbrock #8811 • Distributor: Included • Valve Covers: Elite II #4262 • Finish: Polished • Warranty: 2-year / Unlimited mileage • There is no oil in your engine. • Your engine is supplied with Edelbrock Break-In Oil in the crate. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming. • Block is equipped for different dipstick locations. Plug the one you are not using. • It is important when first starting the engine to keep the rpm above 2,000 for the first 30 minutes. Make sure all fluid levels are topped off and all lines and hoses are hooked up correctly. The break in must be done non-stop. Otherwise, the cam will not break-in properly. This is also a good time to look for leaks of any kind. Engines use a roller cam and do NOT require above procedure. • These engines are not supplied with the crankshaft bolt due to many different applications. The customer must purchase and install the crankshaft bolt that matches the given application.