E-Comm Sales: Sales: 888-799-1135 Tech: 800-416-8628 |
FREE Shipping on orders over $100! 0% Financing Available - Learn More
Toggle Nav Toggle Search
Menu

Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

Be the first to review this product
main product photo
view dyno chart
$245.95
Out of stock
SKU
7102
Notify me when this product is in stock
BENEFITS OF BUYING DIRECT FROM EDELBROCK
Fast Shipping Fast Shipping
Tech support Tech Support
Easy returns Easy Returns
High-quality High-quality
Fast Shipping
Fast shipping
Edelbrock prides themselves in ensuring all products are shipped as quickly as possible.
Shipping policy
Tech support
Easy returns
Edelbrock offers a quick and painless return process on all new and unused products.
Return policy
Easy returns
Tech support
Edelbrock Tech Support is second to none. We can answer any of your tech inquiries!
Tech support
High-quality
High quality
Edelbrock core products are made in the USA offering unsurpassed quality and performance.
About Edelbrock

Reviews

No reviews added
Write Your Own Review
You're reviewing:Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8
Your Rating

Details

Edelbrock Part # 7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake and #60899 cylinder heads on a 350 engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications: • Duration @ .050 Intake: 234 degrees • Duration @ .050 Exhaust: 244 degrees • Lift @ Valve Intake: .488” • Lift @ Valve Exhaust: .510” • Lobe Separation: 112 Degrees • Intake Centerline: 107 Degrees • Idle Vacuum @ 1000 RPM’s: 11”

Documents & Installation Notes

url
PDF-Installation Instructions

Specs

Availability Available
Application Application Specific
UPC 00085347071029
Grade Type PERFORMANCE
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 234 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended Valve Springs for OEM heads: Edelbrock part # 5703
  • Use only stock ratio rocker arms
  • Adjustable valvetrain required
  • In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent.
  • Do not use rotator type valve springs or retainers for this application.
  • Oil/additive must contain Zinc designed for use with flat tappet camshafts.
  • Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.
  • Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.
Advertised Exhaust Duration 318 deg
Advertised Intake Duration 308 deg
Cam Type Cast
Exhaust Duration at .050 inch Lift 244 deg
Exhaust Valve Lift 0.510 in
Intake Valve Lift 0.488 in
Lifter Type Hydraulic
Lobe Separation 112 deg