Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8

Skip to the beginning of the images gallery

$360.95

Edelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine.

Out of stock

SKU

7122

Notify me when this product is in stock

BENEFITS OF BUYING DIRECT FROM EDELBROCK

Fast Shipping

Tech Support

Easy Returns

High-quality

Fast shipping

Edelbrock prides themselves in ensuring all products are shipped as quickly as possible.

Shipping policy

Easy returns

Edelbrock offers a quick and painless return process on all new and unused products.

Return policy

Tech support

Edelbrock Tech Support is second to none. We can answer any of your tech inquiries!

Tech support

High quality

Edelbrock core products are made in the USA offering unsurpassed quality and performance.

About Edelbrock

Availability	Available
Application	Application Specific
UPC	00085347071227
Lifter Materials	Hardened Steel
Computer Controlled Compatible	No
Intake Duration .050 Inch Lift	224 deg
Availability Note	Available to Order
Warranty	12 Months
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended Valve Springs for OEM heads: Edelbrock part #5722; Not for 1985-later engines with roller lifters.; Screw-in studs, guide plates and adjustable rocker arms required.; For non-computer controlled vehicles; Use only stock ratio rocker arms; Adjustable valvetrain required; In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent.; Do not use rotator type valve springs or retainers for this application.; Oil/additive must contain Zinc designed for use with flat tappet camshafts.; Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.; Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.
Advertised Exhaust Duration	300 deg
Advertised Intake Duration	290 deg
Cam Type	Cast
Exhaust Duration at .050 inch Lift	234 deg
Exhaust Valve Lift	0.520 in
Intake Valve Lift	0.496 in
Lifter Type	Hydraulic
Lobe Separation	112 deg

Availability

Available

Application

Application Specific

UPC

00085347071227

Lifter Materials

Hardened Steel

Computer Controlled Compatible

Intake Duration .050 Inch Lift

224 deg

Availability Note

Available to Order

Warranty

12 Months

Emissions Code

Hazardous Materials Warning

WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Installation Notes

Recommended Valve Springs for OEM heads: Edelbrock part #5722; Not for 1985-later engines with roller lifters.; Screw-in studs, guide plates and adjustable rocker arms required.; For non-computer controlled vehicles; Use only stock ratio rocker arms; Adjustable valvetrain required; In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent.; Do not use rotator type valve springs or retainers for this application.; Oil/additive must contain Zinc designed for use with flat tappet camshafts.; Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.; Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.

Advertised Exhaust Duration

300 deg

Advertised Intake Duration

290 deg

Cam Type

Cast

Exhaust Duration at .050 inch Lift

234 deg

Exhaust Valve Lift

0.520 in

Intake Valve Lift

0.496 in