Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rpm range (1500-7000 rpm). Pro-Flo XT EFI intakes accept Edelbrock Pro-Flo XT Throttle Bodies and Fuel Rails. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Gasket Or Seal Included
Available to Order
Ec Basic Operating Rpm Range
Hazardous Materials Warning
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Recommended gasket: Edelbrock #7201,; Manifold Dimensions: A-9.00", B-8.20", C-14.80"; Compatible with Edelbrock #38693 90mm Pro-Flo XT Throttle body.; Machined for a Edelbrock #36019 LS1 style MAP sensor, which mounts directly on the manifold.; The Edelbrock #3627 Fuel rail kit including provisions for either Pico or standard height injectors is available separately.; The throttle body centerline is located 2.5" behind and 6.07" above the front edge of the front end seal surface.; Fits late model low profile water neck (such as TransDapt 9929 or GM 12342024 chrome thermostat housing); No provisions for exhaust heated chokes or EGR.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.