Edelbrock Rollin' Thunder Camshaft for 1997-04 LS1/LS6 (Gen III)

view dyno chart
Add to Wish List
Edelbrock Rollin' Thunder Camshaft #2215 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produce optimum torque from the low-end to the mid-range.
In stock
Fast Shipping Fast Shipping
Tech support Tech Support
Easy returns Easy Returns
High-quality High-Quality
Fast Shipping
Fast shipping
We pride ourselves in ensuring all products are shipped as quickly as possible.
Shipping policy
Tech support
Easy returns
We offer a quick and painless return process on all new and unused products when purchased direct.
Return policy
Easy returns
Tech support
Our Tech Support Agents are second to none. We can answer any of your tech inquiries!
Tech support
High quality
Our core products are made in the USA offering unsurpassed quality and performance.
About Us


Edelbrock Rollin' Thunder Camshaft #2215 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 430HP and 420 Ft Lbs of Torque when paired with Performer RPM Intake manifold #71187, Thunder Series AVS Carb #1813 and E-CNC 215 cylinder heads #79949. Use with high stall torque converter only. Camshaft specifications: - Intake duration: 220 Degrees - Exhaust duration: 220 Degrees - Intake lift: .510" - Exhaust lift: .510" - Lobe separation: 111 Degree - Intake Center Line: 108 Degree - Vacuum: 12"

Documents & Installation Notes



Manufacturer Edelbrock
Application Application Specific
UPC 00085347022151
Exhaust Valve Lift With Factory Rocker Arm Ratio 0.510 in
Exhaust Valve Lift With Factory Rocker Arm Ratio 0.510 in
Computer Controlled Compatible Yes
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • Compression ratio of at least 9.5:1; Adjustable valvetrain required; For street high-performance and racing applications only; Lower than stock rear gearing; High performance torque converter (in automatic transmission equipped vehicles) are necessary.; Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.
Advertised Exhaust Duration 300 deg
Advertised Intake Duration 300 deg
Cam Type Roller
Exhaust Duration at .050 inch Lift 220 deg
Exhaust Valve Lift 0.300 in
Intake Duration at .050 Inch Lift 220 deg
Intake Valve Lift 0.318 in
Intake Valve Lift with Factory Rocker Arm Ratio 0.510 in
Lifter Type Roller
Lobe Separation 111 deg