Memorial Day Lunati Valvetrain Sale Shop Now
Edelbrock Rollin' Thunder Camshaft for 1997-2004 LS1/LS6 (Gen 3)

Edelbrock Rollin' Thunder Camshaft for 1997-04 LS1/LS6 (Gen III)

Edelbrock Rollin' Thunder Camshaft for 1997-2004 LS1/LS6 (Gen 3)

Edelbrock Rollin' Thunder Camshaft for 1997-04 LS1/LS6 (Gen III)

Edelbrock Rollin' Thunder Camshaft for 1997-04 LS1/LS6 (Gen III)

$695.95
Edelbrock Rollin' Thunder camshaft #2216 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range.
In stock
SKU
2216
Edelbrock Rollin' Thunder Camshaft #2216 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 460HP and 424 Ft Lbs of Torque when paired with Performer RPM Intake manifold #71187, Thunder Series AVS Carb #1813 and E-CNC 215 cylinder heads #79949. Use with high stall torque converter only. Camshaft specifications: - Intake duration: 230 Degrees - Exhaust duration: 237 Degrees - Intake lift: .540" - Exhaust lift: .540" - Lobe separation: 110 Degree - Intake Center Line: 106 Degree - Vacuum: 10"
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347022168
Exhaust Valve Lift With Factory Rocker Arm Ratio 0.540 in
Exhaust Valve Lift With Factory Rocker Arm Ratio 0.540 in
Computer Controlled Compatible Yes
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Compression ratio of at least 9.5:1; Adjustable valvetrain required; For street high-performance and racing applications only; Lower than stock rear gearing; High performance torque converter (in automatic transmission equipped vehicles) are necessary.; Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.
Advertised Exhaust Duration 322 deg
Advertised Intake Duration 314 deg
Intake Duration at .050 Inch Lift 314 deg
Intake Valve Lift 0.318 in
Intake Valve Lift with Factory Rocker Arm Ratio 0.540 in
Lifter Type Roller
Lobe Separation 110 deg