Free #1221 Air Cleaner With AVS or Performer Carb Purchase Shop Edelbrock
Edelbrock Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

Edelbrock Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

Torker-Plus Camshaft Kit for 1957-1986 Small-Block Chevy 283-400 V8

Torker-Plus Camshaft Kit for 1957-1986 Small-Block Chevy 283-400 V8

Edelbrock Rollin' Thunder Camshaft Kit for 1987 & Later Small-Block Chevy 383

$1,219.95
Edelbrock part #22076 Rollin' Thunder camshaft kit is designed for 1987 & later small-block Chevy 383 V-8. This complete cam kits include an Edelbrock Rollin' Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods.
Availability: Out of stock
SKU
22076
Edelbrock part #22076 Rollin' Thunder camshaft kit is designed for 1987 & later small-block Chevy 383 V-8 applications. This complete cam kits include an Edelbrock Rollin' Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin' Thunder camshaft kit is ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. However, Rollin' Thunder camshaft package may also be used with other components designed to operate in a similar RPM range. Camshaft Specifications: - Duration @ .050 Intake: 242 degrees - Duration @ .050 Exhaust: 240 degrees - Lift @ Valve Intake: .594" - Lift @ Valve Exhaust: .594" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347220762
Grade Type PERFORMANCE
Camshaft Material Iron
Valve Springs Required Yes
Assembly Lubricant Included Yes
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • This camshaft is designed to function with Valve Springs that have a closed pressure of 150 lbs, open pressure of 420 lbs and a lift of .600"; Do not use rotator type valve springs or retainers for this application.; Use only stock ratio rocker arms; Adjustable valvetrain required; Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.
Intake Valve Lift with Factory Rocker Arm Ratio 0.594 in
Length 21.5 in
Lifter Type Roller