FREE Shipping on orders over $50*
Two Piece Front Cover

Two Piece Front Cover

SBF Timing Cover, 86-93 5.0L & 88-Later 351W With Reverse Rotation Pump

SBF Timing Cover, 86-93 5.0L & 88-Later 351W W/ Reverse Rotation Pump

SBF Timing Cover, 65-78 289(non K-Code) & 302 69-87 351

$210.95
Edelbrock part #4250 for 1965-78 289 (non K-code) & 302 1969-87 351W These die-cast aluminum timing covers for Ford are stock replacement parts for late model EFI 5.0L and 351W engines
TEMPORARILY OUT OF STOCK
SKU
4250
Edelbrock part #4250 for 1965-78 289 (non K-code) & 302 1969-87 351W These die-cast aluminum timing covers for Ford are stock replacement parts for late model EFI 5.0L and 351W engines. Includes gaskets and crankshaft seal. Both are compatible with stock or Edelbrock Victor Series aluminum water pumps.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 085347042500
Mounting Hole Quantity 15
Gasket Or Seal Included Yes
Availability Note Available to Order
Warranty 12 Months
Emissions Code N/A
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Disconnect negative (-) battery terminal; Drain coolant by removing the petcook from the radiator; Disconnect radiator hose and heater hose from the timing cover; Remove the drive belt and harmonic dampener using a special dampener puller. NOTE: On some vehicles, it is necessary to remove radiator and fan assembly to gain access to the harmonic dampener; Disconnect fuel line from the mechanical fuel pump. Remove two bolts securing fuel pump and remove pump. NOTE: Place rag over fuel line and pump to avoid excess fuel spillage; Remove four (4) oil pan bolts attached to the timing cover; Remove eleven (11) bolts securing the water pump to the timing cover; Remove four (4) bolts holding stock timing cover to block; Place a rag over the oil pan opening to prevent debris from falling into oil pan. Carefully scrape all gasket surfaces on face of block and oil pan surface to remove old gasket and residue
Color Satin
Finish Natural
Material Aluminum