Menu
EDELBROCK CARBURETORS
Every Edelbrock Carburetor is manufactured in the USA and has been specifically designed and tuned by Edelbrock engineers to provide the widest overall torque range. For unmatched street performance, combine them with Edelbrock Performance Manifold and camshaft combinations!

HUGE BENEFITS

GREAT CRUISING
PERFORMANCE

With a new Edelbrock carburetor, you can expect your classic hot rod, street machine or truck to run smoother, start quicker and deliver better low-end throttle response.

READY TO RUN
OUT OF THE BOX

Performer, Thunder Series AVS and AVS2 carbs come with factory-set float levels and are ready to bolt on and go. Installation & tuning DVD included with every new carb.

EASY TO ADJUST
AND CHANGE JETS

Change jets, replace needles/seats and adjust floats on any Edelbrock carburetor without having to drain the fuel from the bowls or remove the carb from the manifold.

AVS2 SERIES CARBURETORS

Edelbrock’s next-generation AVS2 Series Carburetors feature annular flow primary boosters with a new calibration for improved off-idle and cruising performance. AVS2 Off-Road Series Carburetors provide total fuel control when the going gets rough. We’ve combined AVS2 technology with enhanced metering for better performance on those overland adventure trips and weekend excursions. Works great for street 4x4s and automotive applications, too!
    EXCITING NEW FEATURES:
  • Improved fuel atomization eliminates flat spots when the carb transitions from idle to full throttle
  • Each annular booster features eight equally spaced orifices to improve fuel metering from idle to the main
  • Improved flow metering is ideal for most small or big-block engines with dual or single-plane manifolds
  • Timed and full vacuum ports for ignition advance
  • Available in 500 CFM, 650 CFM, and 800 CFM with electronic or manual choke
  • Off-Road Carbs include Spring-loaded needle and seat for rough terrain as well as a spring-loaded anti-syphon discharge ball which eliminates fuel drip

VRS-4150® CARBURETORS

The Edelbrock VRS-4150 Race and Performance Carburetors features a street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to this carburetor that are ideal for any race or ultra high-performance applications.
    FEATURES INCLUDE:
  • For Race and Performance Applications
  • Multiple vacuum hook-ups keep it usable on the street but still ready for the track
  • 20% larger capacity fuel bowls feature internal ribs to control fuel slosh
  • External idle adjustment screws are accessible without removing the air cleaner/scoop
  • Available in 650 CFM, 750 CFM, 850 CFM & 950 CFM
The Edelbrock VRS-4150 Race and Performance Carburetors

PERFORMER SERIES® CARBURETORS

Edelbrock Performer Series carbs are the perfect stock replacement carburetors and also the ideal four-barrel upgrade for mild street applications.
    FEATURES INCLUDE:
  • Calibrated for optimum performance with engines operating in the idle-to-5,500 RPM range
  • Several calibrations available for maximum fuel economy, off-road applications, and high-performance street or track use
  • Available in 500 CFM, 600 CFM, 750 CFM and 800 CFM with electronic or manual choke
  • The ideal stock replacement carburetor for cars, trucks, 4x4s and recreational vehicles

MARINE SERIES CARBURETORS

Edelbrock Marine Series Carburetors comply with U.S. Coast Guard safety standards and are intended for use in any marine application where a performance four-barrel is desired.
    FEATURES INCLUDE:
  • Cast surfaces are gold-iridited with PTFE-coated shafts and pump arms for durability and protection
  • Includes modified bowl venting, specially designed throttle shafts, accelerator pump seal and revised secondaries for improved transient performance
  • Includes 3/8" inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, 5-1/8" flame arrestor flange and universal throttle lever
  • Available in 600 CFM and 750 CFM - electric choke

MANIFOLD AND CARBURETOR KITS

Available for small-block and big-block Chevys, Chryslers, Fords and Pontiac, Edelbrock is making it easy to upgrade your induction system with the best combination of proven Edelbrock performance in a single box. The new Manifold and Carb Kits feature our show-quality EnduraShine™ finish and provide everything needed to install an Edelbrock manifold and carburetor on street rods or muscle cars.

CARBURETOR ACCESSORIES

Edelbrock offers a large assortment of carburetor accessories for your Performer Series, Thunder Series AVS®, AVS2, Quadrajet and NON-Edelbrock Carburetors. This includes performance products as well as replacement components to keep your carburetor running at full strength. View products such as service or maintenance parts, calibration kits, fuel filters and inlet kits.

THE
FUTURE OF
CARBURETION!

AVS2 CARBS

WHAT PEOPLE ARE SAYING