Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy

$576.95

Edelbrock Victor Ram 23 Degree Intake Manifold Base For Chevrolet 262-400 Small-Block V8

TEMPORARILY OUT OF STOCK

SKU

7070

Details

Edelbrock part #7070 Victor Ram 23-degree for Small-Block Chevy is a tunnel ram manifold base for the control of high velocity mixture flow, especially above 8500 rpm. Suited to drag race engines operating at 6500-10,000 rpm and race boat engines above 7000 rpm. Does not fit raised port cylinder heads or 1987 and later cast iron heads.

More Information

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347070701
Series	Dual-Quad/Multi Carb
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
Ec Basic Operating Rpm Range	6500-10000 RPM
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #1206; Distance from carburetor center to carburetor center: 8.88"; Manifold top with base height: 9.25"; H.E.I. ignition will not clear manifold; For the heights of all Edelbrock manifolds, please visit the Manifold Reference Dimensions page. http://www.edelbrock.com/automotive/mc/manifolds/reference-dimensions.shtml; H.E.I. ignition will not clear manifold; Base ONL:Y; Match with Edelbrock top #7073; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Optimum cylinder head port opening size should be as close as possible to the size of the gasket being used.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
Color	Satin
Material	Aluminum
Rear Maximum Height	7.130 in
Single Or Dual Plane Type	Single