Memorial Day Lunati Valvetrain Sale Shop Now
SBF Timing Cover, 86-93 5.0L & 88-Later 351W With Reverse Rotation Pump

SBF Timing Cover, 86-93 5.0L & 88-Later 351W W/ Reverse Rotation Pump

Timing Cover SBC Stamped Steel With Welded Star & Logo Chrome

Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome

Timing Cover, Pontiac 1969-79 350-455

$314.95
Edelbrock part #4265 Pontiac Timing Cover Pontiac: This die-cast aluminum timing covers for Pontiac comes with pan seal, gaskets and timing marker. Designed to fit 1969-79 350-455 c.i.d. Pontiac engines
TEMPORARILY OUT OF STOCK
SKU
4265
Edelbrock part #4265 Pontiac Timing Cover Pontiac: This die-cast aluminum timing covers for Pontiac comes with pan seal, gaskets and timing marker. Designed to fit 1969-79 350-455 c.i.d. Pontiac engines. Compatible with stock or Edelbrock Victor Series aluminum water pump #8856.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347042654
Mounting Hole Quantity 19
Gasket Or Seal Included Yes
Availability Note Available to Order
Warranty 12 Months
Emissions Code N/A
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Disconnect negative (-) battery terminal; Drain coolant by removing the petcook from the radiator; Disconnect radiator hose and heater hose from the timing cover; Remove the drive belt and harmonic dampener using a special dampener puller. NOTE: On some vehicles, it is necessary to remove radiator and fan assembly to gain access to the harmonic dampener; Disconnect fuel line from the mechanical fuel pump. Remove two bolts securing fuel pump and remove pump. NOTE: Place rag over fuel line and pump to avoid excess fuel spillage; Remove four (4) oil pan bolts attached to the timing cover; Remove eleven (11) bolts securing the water pump to the timing cover; Remove four (4) bolts holding stock timing cover to block; Place a rag over the oil pan opening to prevent debris from falling into oil pan. Carefully scrape all gasket surfaces on face of block and oil pan surface to remove old gasket and residue
Color Satin
Finish Natural
Material Aluminum