Edelbrock part #5091 Torker II 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Recommended intake gasket: #7225; Manifold height: A-4.15", B-5.20", measured to engine block; Carb pad height: 4.67"; Carb recommendations: Edelbrock AVS2 or Performer Series 750-800cfm. Use #1481 or #1843 throttle/transmission lever kit.; Port exit dimensions: 1.10" x 2.17"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.