Menu

Select your vehicle

to verify compatibility

Your Vehicle:
Change Vehicle Cancel Change
Please select your vehicle to verify compatibility.

Water Pump Ford 5.0L Late Model in Polished Finish

$335.17
Add to Wish List
In stock
SKU
8046
BENEFITS OF BUYING DIRECT FROM EDELBROCK
Fast Shipping Fast Shipping
Tech support Tech Support
Easy returns Easy Returns
High-quality High-quality
Fast Shipping
Fast shipping
Edelbrock prides themselves in ensuring all products are shipped as quickly as possible.
Shipping policy
Tech support
Easy returns
Edelbrock offers a quick and painless return process on all new and unused products.
Return policy
Easy returns
Tech support
Edelbrock Tech Support is second to none. We can answer any of your tech inquiries!
Tech support
High-quality
High quality
Edelbrock core products are made in the USA offering unsurpassed quality and performance.
About Edelbrock

Reviews

No reviews added
Write Your Own Review
You're reviewing:Water Pump Ford 5.0L Late Model in Polished Finish
Your Rating

Details

Edelbrock # 8046 Polished water pump for 1993-97 F Series, 5.0/ 5.8L V8, using a serpentine accessoru drive belt. Not for early model 289-302, will not fit 1994-1995 Mustang provides maximum cooling form the street and the race track. Water pump provide maximum flow, maximum pressure and equal distribution to both sides of the block with 1%.

Specs

Availability Available
Application Universal
GTIN 00085347080465
Availability Note Available to Order
Warranty 12 Months
Emissions Code N/A
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Installation is the same as for original equipment water pumps
  • Consult service manual for specific procedures, if necessary
  • Remove two screws from backing plate and apply RTV silicone to gasket just before installation
  • Reassemble backing plate and install on engine using RTV silicone
  • Be sure that the fan bolts don?t protrude through the hub so far that they hit the water pump housing
  • Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications
  • The distance from the flange surface to the hub should measure 5.75?.
  • Incorrect alignment or an unbalanced condition puts excessive strain on the pump?s shaft and/or bearing and will result in early failure of the shaft and/or bearing. The balance of the assembly depends primarily upon the concentricity of the fan clutch with the pump shaft. Concentricity is not assured when universal type clutches are used. The universal fan clutch has a 3/4? pilot hole, so an adapter must be used when installing a water pump with a 5/8? shaft. This adapter bushing is supplied with the unit. These adapter bushings add to the machine tolerances of the assembly, so special care must be taken to maintain concentricity with the shaft and the clutch fan. The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump.
Hub Height 5.420 in
Impeller Rotation Standard
Outlet Quantity 1
Pulley Included No
Water Pump Drive Type V-Belt